Program download music. MP3::Tag - Module for reading tags of MP3 audio files -

MP3::Tag - Module for reading tags of MP3 audio files Mp3 search.

use MP3::Tag; $mp3 = MP3::Tag->new($filename); # get some information about the file in the easiest way ($title, $track, $artist, $album, $comment, $year, $genre) = $mp3->autoinfo(); # Or: $comment = $mp3->comment(); $dedicated_to = $mp3->select_id3v2_frame_by_descr('COMM(fre,fra,eng,#0)[dedicated to]'); $mp3->title_set('New title'); # Edit in-memory copy $mp3->select_id3v2_frame_by_descr('TALB', 'New album name'); # Edit in memory $mp3->select_id3v2_frame_by_descr('RBUF', $n1, $n2, $n3); # Edit in memory $mp3->update_tags({year => 1866}); # Edit in-memory, and commit to file $mp3->update_tags(); # Commit to file

The following low-level access code is discouraged; better use title() etc., title_set() etc., update_tags(), select_id3v2_frame_by_descr() etc. methods on the wrapper $mp3:

# scan file for existing tags $mp3->get_tags; if (exists $mp3->{ID3v1}) { # read some information from the tag $id3v1 = $mp3->{ID3v1}; # $id3v1 is only a shortcut for $mp3->{ID3v1} print $id3v1->title; # change the tag contents $id3v1->all("Song","Artist","Album",2001,"Comment",10,"Top 40"); $id3v1->write_tag; } if (exists $mp3->{ID3v2}) { # read some information from the tag ($name, $info) = $mp3->{ID3v2}->get_frame("TIT2"); # delete the tag completely from the file $mp3->{ID3v2}->remove_tag; } else { # create a new tag $mp3->new_tag("ID3v2"); $mp3->{ID3v2}->add_frame("TALB", "Album title"); $mp3->{ID3v2}->write_tag; } $mp3->close();

Please consider using the script mp3info2; it allows simple access to most features of this module via command-line options; see mp3info2.

Thomas Geffert, Ilya Zakharevich, ilyaz@cpan.org

is a wrapper module to read different tags of mp3 files. It provides an easy way to access the functions of separate modules which do the handling of reading/writing the tags itself.

At the moment MP3::Tag::ID3v1 and MP3::Tag::ID3v2 are supported for read and write; MP3::Tag::ImageExifTool, MP3::Tag::Inf, MP3::Tag::CDDB_File, MP3::Tag::File, MP3::Tag::Cue, MP3::Tag::ImageSize, MP3::Tag::LastResort are supported for read access (the information obtained by Image::ExifTool (if present), parsing CDDB files, .inf file, the filename, and .cue file, and obtained via Image::Size ) (if present).

Creates a mp3-object, which can be used to retrieve/set different tags.

[old name: getTags(). The old name is still available, but its use is not advised] @tags = $mp3->get_tags;

Checks which tags can be found in the mp3-object. It returns a list @tags which contains strings identifying the found tags, like "ID3v1", "ID3v2", "Inf", or "CDDB_File" (the last but one if the .inf information file with the same basename as MP3 file is found).

Each found tag can then be accessed with $mp3->{tagname}, where tagname is a string returned by get_tags ;

This method produces a "fake" MP3::Tag object which behaves as an MP3 file without tags. Give a TRUE optional argument if you want to set some properties of this object.

[old name: newTag(). The old name is still available, but its use is not advised] $tag = $mp3->new_tag($tagname);

Creates a new tag of the given type $tagname. You can access it then with $mp3->{$tagname}. At the moment ID3v1 and ID3v2 are supported as tagname.

Returns an tag-object: $mp3->{$tagname}.

You can use close() to explicitly close a file. Normally this is done automatically by the module, so that you do not need to do this.

$allgenres = $mp3->genres; $genreName = $mp3->genres($genreID); $genreID = $mp3->genres($genreName);

Returns a list of all genres (reference to an array), or the according name or id to a given id or name.

This function is only a shortcut to MP3::Tag::ID3v1->genres.

This can be also called as MP3::Tag->genres;

($title, $track, $artist, $album, $comment, $year, $genre) = $mp3->autoinfo(); $info_hashref = $mp3->autoinfo();

autoinfo() returns information about the title, track number, artist, album name, the file comment, the year and genre. It can get this information from an ID3v1-tag, an ID3v2-tag, from CDDB file, from .inf-file, and from the filename itself.

It will as default first try to find a ID3v2-tag to get this information. If this cannot be found it tries to find a ID3v1-tag, then to read an CDDB file, an .inf-file, and if these are not present either, it will use the filename to retrieve the title, track number, artist, album name. The comment, year and genre are found differently, via the

You can change the order of lookup with the config() command.

autoinfo() returns an array with the information or a hashref. The hash has four keys 'title', 'track', 'artist' and 'album' where the information is stored. If comment, year or genre are found, the hash will have keys 'comment' and/or 'year' and/or 'genre' too.

is given, the returned values (title, track number, artist, album name, the file comment, the year and genre) are array references with the first element being the value, the second the tag (

(Deprecated name 'song' can be used instead of 'title' as well.)

$comment = $mp3->comment(); # empty string unless found

comment() returns comment information. It can get this information from an ID3v1-tag, or an ID3v2-tag (from

frame with empty <short> field), CDDB file (from

It will as default first try to find a ID3v2-tag to get this information. If no comment is found there, it tries to find it in a ID3v1-tag, if none present, will try CDDB file, then .inf-file. It returns an empty string if no comment is found.

You can change the order of this with the config() command.

is given, returns an array reference with the first element being the value, the second the tag (ID3v2 or ID3v1) from which the value is taken.

$year = $mp3->year(); # empty string unless found

year() returns the year information. It can get this information from an ID3v2-tag, or ID3v1-tag, or .inf-file, or filename.

It will as default first try to find a ID3v2-tag to get this information. If no year is found there, it tries to find it in a ID3v1-tag, if none present, will try CDDB file, then .inf-file, then by parsing the file name. It returns an empty string if no year is found.

You can change the order of this with the config() command.

is given, returns an array reference with the first element being the value, the second the tag (ID3v2 or ID3v1 or filename) from which the value is taken.

comment_collection(), comment_track(), title_track(). artist_collection()

access the corresponding fields returned by parse() method of CDDB_File.

access the corresponding methods of

title_set(), artist_set(), album_set(), year_set(), comment_set(), track_set(), genre_set()

$mp3->title_set($newtitle, [$force_id3v2]);

Set the corresponding value in ID3v1 tag, and, if the value does not fit, or force_id3v2 is TRUE, in the ID3v2 tag. Changes are made to in-memory copy only. To propagate to the file, use update_tags() or similar methods.

Same as track(), but strips trailing info: if track() returns

(which means track 3 of 12), this method returns

Returns the second part of track number (compare with track1()).

Same as track1(), but pads with leading 0s to width of track2(); takes an optional argument (default is 2) giving the pad width in absense of track2().

Same as track1(), track2(), but with disk-number instead of track-number (stored in

Same as disk1(), but encodes a non-empty result as a letter (1 maps to

, etc). If number of disks is more than 26, falls back to numeric (e.g,

Returns the MIME type as a string. Returns

application/octet-stream

for unrecognized types. If not $lazy, will try harder (via ExifTool, if needed).

Returns uppercased first component of MIME type.

$genre = $mp3->genre(); # empty string unless found

genre() returns the genre string. It can get this information from an ID3v2-tag or ID3v1-tag.

It will as default first try to find a ID3v2-tag to get this information. If no genre is found there, it tries to find it in a ID3v1-tag, if none present, will try .inf-file, It returns an empty string if no genre is found.

You can change the order of this with the config() command.

is given, returns an array reference with the first element being the value, the second the tag (ID3v2 or ID3v1 or filename) from which the value is taken.

$composer = $mp3->composer(); # empty string unless found

composer() returns the composer. By default, it gets from ID3v2 tag, otherwise returns artist.

You can change the inspected fields with the config() command. Subject to normalization via

configuration variables.

$performer = $mp3->performer(); # empty string unless found

performer() returns the main performer. By default, it gets from ID3v2 tag

, otherwise from ID3v2 tag

, otherwise returns artist.

You can change the inspected fields with the config() command. Subject to normalization via

configuration variables.

MP3::Tag->config(item => value1, value2...); # Set options globally $mp3->config(item => value1, value2...); # Set object options

When object options are first time set or get, the global options are propagated into object options. (So if global options are changed later, these changes are not inherited.)

Configure the order in which ID3v1-, ID3v2-tag and filename are used by autoinfo. The default is

ParseData, ID3v2, ID3v1, ImageExifTool, CDDB_File, Inf, Cue, ImageSize, filename, LastResort

. Options can be elements of the default list. The order in which they are given to config also sets the order how they are used by autoinfo. If an option is not present, it will not be used by autoinfo (and other auto-methods if the specific overriding config command were not issued).

$mp3->config("autoinfo","ID3v1","ID3v2","filename");

sets the order to check first ID3v1, then ID3v2 and at last the Filename

$mp3->config("autoinfo","ID3v1","filename","ID3v2");

sets the order to check first ID3v1, then the Filename and last ID3v2. As the filename will be always present ID3v2 will here never be checked.

$mp3->config("autoinfo","ID3v1","ID3v2");

sets the order to check first ID3v1, then ID3v2. The filename will never be used.

title artist album year comment track genre

Configure the order in which ID3v1- and ID3v2-tag are used by the corresponding methods (e.g., comment()). Options can be the same as for

. The order in which they are given to config also sets the order how they are used by comment(). If an option is not present, then

option will be used instead.

regular expression to match the file extension (including the dot). The default is to match 1..4 letter extensions which are not numbers.

to interpolate to get the composer. Default is

to interpolate to get the main performer. Default is

the data used by MP3::Tag::ParseData handler; each option is an array reference of the form

. All the options are processed in the following way: patterns are matched against $string until one of them succeeds; the information obtained from later options takes precedence over the information obtained from earlier ones.

The regular expression to split the data when parsing with

parse_filename_ignore_case

If true (default), calling parse() and parse_rex() with match-filename escapes (such as

) matches case-insensitively.

parse_filename_merge_dots

If true (default), calling parse() and parse_rex() with match-filename escapes (such as

) does not distinguish a dot and many consequent dots.

string to put between multiple occurences of a tag in a parse pattern; defaults to

results in comment set to

with the default value of

Configure the elements of ID3v2-tag which are used by ID3v2::title(). Options can be "TIT1", "TIT2", "TIT3"; the present values are combined. If an option is not present, it will not be used by ID3v2::title().

List of files to look for in the directory of MP3 file to get CDDB info.

If TRUE (default) parse() will match complicated timestamps against

is a range from 23rd to 30th of October 2001, and 28th of February of 2002. According to ISO,

as well. For convenience, the leading 0 can be omited from the fields which ISO requires to be 2-digit.

When extracting the date from comment fields, remove the recognized portion even if it is human readable (e.g.,

) if TRUE. Current default: FALSE.

The language to use to select ID3v2 frames, and to choose

ID3v2 frame accessed in comment() method (default is 'XXX'; if not

, this should be lowercase 3-letter abbreviation according to ISO-639-2).

The description field used to choose the

ID3v2 frame accessed in comment() method. Defaults to

When setting the individual id3v2 frames via ParseData, do not remove the frames set to an empty string. Default 0 (empty means 'remove').

Minimal padding to reserve after ID3v2 tag when writing (default 128),

, insert padding to make file size multiple of this when writing ID3v2 tag (default 512), Should be power of 2.

If TRUE, when writing ID3v2 tag, shrink the file if needed (default FALSE).

If TRUE, when writing ID3v2 tag, consider the 0-bytes following the ID3v2 header as writable space for the tag (default FALSE).

If TRUE, when writing ID3v2 tag, create a

tag if the duration is known (as it is after calling methods like

, or interpolation the duration value). If this field is 2 or more, force creation of ID3v2 tag by update_tags() if the duration is known.

FALSE, or a subroutine used to munch a field

title track artist album comment year genre comment_collection comment_track title_track artist_collection person

) to some "normalized" form. Takes two arguments: the MP3::Tag object, and the current value of the field.

The second argument may also have the form

is the string indentifying the handler which returned the value.

, but the intent is for this subroutine to translate a personal name field to a shortest "normalized" form.

list of ID3v2 frames subject to normalization via

All mp3 free download

handler; current default is

TEXT TCOM TXXX[TPE1] TPE1 TPE3 TOPE TOLY TMCL TIPL TENC TXXX[person-file-by]

. Used by select_id3v2_frame_by_descr(), frame_translate(), frames_translate().

If TRUE, interpolating ID3v2 frames (e.g., by

) when the ID3v2 tags is missing is a fatal error. If false (default), in such cases interpolation results in an empty string.

If TRUE, interpolating the whole ID3v2 tag (by

) will recalculate the tag even if its contents is not modified.

-escapes (matching any string) which should matched non-greedily by parse() and friends. E.g., parsing

gives different results for the settings 0 and 1; note that greediness of

does not matter, thus the value of 1 is equivalent for the value of

for this particular pattern.

Old experimental flag to test why ITunes refuses to handle unsyncronized tags (does not help, see id3v23_unsync ). The idea was that version 2.3 of the standard is not clear about frame size field, whether it is the size of the frame after unsyncronization, or not. We assume that this size is one before unsyncronization (as in v2.2). Setting this value to 1 will assume another interpretation (as in v2.4) for write.

Some broken MP3 players (e.g., ITunes, at least up to v6) refuse to handle unsyncronized (i.e., written as the standard requires it) tags; they may need this to be set to FALSE. Default: TRUE.

(Some details: by definition, MP3 files should contain combinations of bytes

only at the start of audio frames ("syncronization" points). ID3v2 standards take this into account, and supports storing raw tag data in a format which does not contain these combinations of bytes [via "unsyncronization"]. Itunes etc do not only emit broken MP3 files [which cause severe hiccups in players which do not know how to skip ID3v2 tags, as most settop DVD players], they also refuse to read ID3v2 tags written in a correct, unsyncronized, format.)

(Note also that the issue of syncronization is also applicable to ID3v1 tags; however, since this data is near the end of the file, many players are able to recognize that the syncronization points in ID3v1 tag cannot start a valid frame, since there is not enough data to read; some other players would hiccup anyway if ID3v1 contains these combinations of bytes...)

If FALSE (default), data containing "high bit characters" is considered to not fit ID3v1 tag if one of the following conditions hold:

is set (so the resulting ID3v1 tag is not standard-complying, thus ambiguous without ID3v2), or

is set (thus read+write operation is not idempotent for ID3v1 tag).

With the default setting, these problems are resolved as far as (re)encoding of ID3v2 tag is non-ambiguous (which holds with the default settings for ID3v2 encodeing).

decode_encoding_filename

decode_encoding_cddb_file

, filenames, external files, .inf files,

files, .cue files, and user-specified files correspondingly. The value of 0 means "latin1".

are set from the corresponding

environment variable (here

stands for the uppercased last component of the name); if this variable is not set, from

. Likewise, the default value for

MP3TAG_ENCODE_V1_DEFAULT

; if not present, from the value for

has no "encode" pair; it may also be disabled per tag via effects of

ignore_trusted_encoding0_v2

and the corresponding frame

TXXX[trusted_encoding0_v2]

in the tag. One should also keep in mind that the ID3v1 standard requires the encoding to be "latin1" (so does not store the encoding anywhere); this does not make a lot of sense, and a lot of effort of this module is spend to fix this unfortunate flaw. See "Problems with ID3 format".

ignore_trusted_encoding0_v2

If FALSE (default), and the frame

TXXX[trusted_encoding0_v2]

is set to TRUE, the setting of

id3v2_set_trusted_encoding0

If TRUE (default), and frames are converted from the given

to a standard-conforming encoding, a frame

TXXX[trusted_encoding0_v2]

with a TRUE value is added.

[The purpose is to make multi-step update in presence of

id3v2_set_trusted_encoding0

ignore_trusted_encoding0_v2

FALSE (both are default values), editing of tags can be idempotent.]

id3v2_fix_encoding_on_write

is defined, the ID3v2 frames are converted to standard-conforming encodings on write. The default is FALSE.

id3v2_fix_encoding_on_edit

is defined (and not disabled via a frame

TXXX[trusted_encoding0_v2]

ignore_trusted_encoding0_v2

), a CYA action is performed when an edit may result in a confusion. More precise, adding an ID3v2 frame which is essentially affected by

would convert other frames to a standard-conforming encoding (and would set

TXXX[trusted_encoding0_v2]

id3v2_set_trusted_encoding0

Recall that the added frames are always encoded in standard-conformant way; the action above avoids mixing non-standard-conformant frames with standard-conformant frames. Such a mix could not be cleared up by setting

! One should also keep in mind that this does not affect frames which contain characters above

; such frames are always written in Unicode, thus are not affected by

Hash of suggested ID3v2 frames to autogenerate basing on extra information available; keys are frame descriptors (such as

), values indicate whether ID3v2 tag should be created if it was not present.

This variable is inspected by the method

, which is not called automatically when the tag is accessed, but may be called by scripts using the module.

The default is to force creation of tag for

frame, and do not force creation for

Name of configuration file read at startup by the method parse_cfg(); is

-substituted; defaults to ~/.mp3tagprc.

If FALSE (default), reading of ID3v2.4 is allowed (it is not fully supported, but most things work acceptably).

If FALSE (default), writing of ID3v2.4 is prohibited (it is not fully supported; allow on your own risk).

name_for_field_normalization

interpolation of this string is used as a person name to normalize title-like fields. Defaults to

List of extra config keys (default is empty); setting these would not cause warnings, and would not affect operation of

. Applications using this module may add to this list to allow their configuration by the same means as configuration of

Contains a boolean value, or a method name and argument list to call whether the tag may be added to the file. Defaults to writable_by_extension().

Contains a list of extensions (case insensitive) for which the tag may be added to the file. Current default is

mp3 mp2 id3 tag ogg mpg mpeg mp4 aiff flac ape ram mpc

Later there will be probably more things to configure.

When object options are first time set or get, the global options are propagated into object options. (So if global options are changed later, these changes are not inherited.)

Similar to get_config(), but returns UNDEF if no config array is present, or the first entry of array otherwise.

name_for_field_normalization

$name = $mp3->name_for_field_normalization;

Returns "person name" to use for normalization of title-like fields; it is the result of interpolation of the configuration variable

name_for_field_normalization

- which, by default, expands the same as

Configures $mp3 to not read anything except the pure ID3v2 or ID3v1 tags, and do not postprocess them. Returns the object reference itself to simplify chaining of method calls.

$data = $mp3->get_user($n); # n-th piece of user scratch space

Queries an entry in a scratch array ($n=3 corresponds to

$mp3->set_user($n, $data); # n-th piece of user scratch space

Sets an entry in a scratch array ($n=3 corresponds to

$mp3->set_id3v2_frame($name, @values);

When called with only $name as the argument, removes the specified frame (if it existed). Otherwise sets the frame passing the specified @values to the add_frame() function of MP3::Tag::ID3v2. (The old value is removed.)

($descr, @frames) = $mp3->get_id3v2_frames($fname);

Returns the specified frame(s); has the same API as MP3::Tag::ID3v2::get_frames, but also returns undef if no ID3v2 tag is present.

. Deletes the tag if it is present. Returns FALSE if the tag is not present.

Returns TRUE if ID3v2 tag exists and was modified after creation.

$frame = $mp3->select_id3v2_frame($fname, $descrs, $langs [, $VALUE]);

Returns the specified frame(s); has the same API as "frame_select" in MP3::Tag::ID3v2 (args are the frame name, the list of wanted Descriptors, list of wanted Languages, and possibly the new contents - with

meaning deletion). For read-only access it returns empty if no ID3v2 tag is present, or no frame is found.

If new contents is specified, ALL the existing frames matching the specification are deleted.

$have_it = $mp3->have_id3v2_frame($fname, $descrs, $langs);

Returns TRUE the specified frame(s) exist; has the same API as MP3::Tag::ID3v2::frame_have (args are frame name, list of wanted Descriptors, list of wanted Languages).

Returns a hash reference with the short names of ID3v2 frames present in the tag as keys (and long description of the meaning as values), or FALSE if no ID3v2 tag is present. See MP3::Tags::ID3v2::get_frame_ids for details.

id3v2_frame_descriptors

Returns the list of human-readable "long names" of frames (such as

COMM(eng)[lyricist birthdate]

), appropriate for interpolation, or for select_id3v2_frame_by_descr().

select_id3v2_frame_by_descr

have_id3v2_frame_by_descr

Similar to select_id3v2_frame(), have_id3v2_frame(), but instead of arguments $fname, $descrs, $langs take one string of the form

parts may be omitted; langs should contain comma-separated list of needed languages. The semantic is similar to MP3::Tag::ID3v2::frame_select_by_descr_simpler.

etc; for more user-friendly scheme, use

$frame = $mp3->select_id3v2_frame_by_descr($descr [, $VALUE1,...]); $have_it = $mp3->have_id3v2_frame_by_descr($descr);

select_id3v2_frame_by_descr() will also apply the normalizer in config setting

if the frame name matches one of the elements of the configuration setting

$c = $mp3->select_id3v2_frame_by_descr("COMM(fre,fra,eng,#0)[]"); $t = $mp3->select_id3v2_frame_by_descr("TIT2"); $mp3->select_id3v2_frame_by_descr("TIT2", "MyT"); # Set/Change $mp3->select_id3v2_frame_by_descr("RBUF", $n1, $n2, $n3); # Set/Change $mp3->select_id3v2_frame_by_descr("RBUF", "$n1;$n2;$n3"); # Set/Change $mp3->select_id3v2_frame_by_descr("TIT2", undef); # Remove

Remember that when select_id3v2_frame_by_descr() is used for modification, ALL found frames are deleted before a new one is added. For gory details, see "frame_select" in MP3::Tag::ID3v2.

$mp3->frame_translate('TCOM'); # Normalize TCOM ID3v2 frame

assuming that the frame value denotes a person, normalizes the value using personal name normalization logic (via

configuration value). Frame is updated, but the tag is not written back. The frame must be in the list of personal names frames (

Similar to frame_translate(), but updates all the frames in

Copies specified frames between

objects $from, $to. Unless $keep_flags, the copied frames have their flags cleared. If the array reference $f_ids is not specified, all the frames (but

) are considered (subject to $overwrite), otherwise $f_ids should contain short frame ids to consider. Group ID flag is always cleared.

, frames with the same descriptors (as returned by get_frame_descr()) in $to are deleted first, then all the specified frames are copied. If $overwrite is FALSE, only frames with descriptors not present in $to are copied. (If one of these two conditions is not met, the result may be not conformant to standards.)

Returns count of copied frames.

Myfreemp3

Internal method to extract MIME type from a string the image file content. Returns

application/octet-stream

for unrecognized data (unless extra TRUE argument is given).

Currently, only the first 4 bytes of the string are inspected.

$string = $mp3->shorten_person($person_name);

shorten $person_name as a personal name (according to

$string = $mp3->normalize_person($person_name);

normalize $person_name as a personal name (according to

$mp3->id3v2_frames_autofill($force);

Generates missing tags from the list specified in

configuration variable. The tags should be from a short list this method knows how to deal with:

TXXX[MCDI-fulltoc]: filled from file in directory of the audio file. [Create this file with readcd -fulltoc dev=0,1,0 -f=audio_cd >& nul modifying the dev (and redirection per your shell). ] TXXX[cddb_id] TXXX[cdindex_id]: filled from the result of the corresponding method (which may extract from.inf or cddb files).

Existing frames are not modified unless $force option is specified; when $force is true, ID3v2 tag will be created even if it was not present.

$string = $mp3->interpolate($pattern)

-escapes in $pattern using the information from $mp3 tags. The syntax of escapes is similar to this of sprintf():

% [ [FLAGS] MINWIDTH] [.MAXWIDTH] ESCAPE

The only recognized FLAGS are

(to denote left-alignment inside MINWIDTH- wide field),

(denoting the fill character to use), as well as an arbitrary character in parentheses (which becomes the fill character). MINWIDTH and MAXWIDTH should be numbers.

The short ESCAPEs are replaced by

% => literal '%' t => title a => artist l => album y => year g => genre c => comment n => track f => filename without the directory path F => filename with the directory path D => the directory path of the filename E => file extension e => file extension without the leading dot A => absolute filename without extension B => filename without the directory part and extension N => filename as originally given without extension v mpeg_version L mpeg_layer_roman r bitrate_kbps q frequency_kHz Q frequency_Hz S total_secs_int M total_millisecs_int m total_mins mL leftover_mins H total_hours s leftover_secs SL leftover_secs_trunc ML leftover_msec SML leftover_secs_float C is_copyrighted_YN p frames_padded_YN o channel_mode u frames h height (these 3 for image files, Image::Size or Image::ExifData required) w width iT img_type mT mime_type mP mime_Pretype (the capitalized first part of mime_type) aR aspect_ratio (width/height) a3 aspect_ratio3 (3 decimal places after the dot) aI aspect_ratio_inverted (height/width) bD bit_depth aC collection artist (from CDDB_File) tT track title (from CDDB_File) cC collection comment (from CDDB_File) cT track comment (from CDDB_File) iC CDDB id iI CDIndex id

(Multi-char escapes must be inclosed in braces, as in

Additional multi-char escapes are interpretated is follows:

Names of ID3v2 frames are replaced by their text values (empty for missing frames).

are replaced by "pure track number" and "max track number" (this allows for both formats

of "track", the latter meaning track N1 of N2); use

with leading 0 to the width of

(in absense of n2, to 2). Likewise for

but with disk (media) number instead of track number; use

are replaced by the whole ID3v1/2 tag (interpolation of

for an unmodified tag is subject to

configuration variable). (These may work as conditionals too, with

FRAM(list,of,languages)[description]

are replaced by the first FRAM frame with the descriptor "description" in the specified comma-separated list of languages. Instead of a language (ID3v2 uses lowercase 3-char ISO-639-2 language notations) one can use a string of the form

means 4th FRAM frame, or FRAM04. Empty string for the language means any language.) Works as a condition for conditional interpolation too.

Any one of the list of languages and the disription can be omitted; this means that either the frame FRAM has no language or descriptor associated, or no restriction should be applied.

Unknown language should be denoted as

(in uppercase!). The language match is case-insensitive.

Several descriptors of the form

FRAM(list,of,languages)[description]

discussed above may be combined together with

; the non-empty expansions are joined together with the value of configuration variable

method(list,of,packages)[arg1][arg2]

are replaced by the result of

(with the given arguments) in one of the specified known subpackages (e.g., for

is used). Arbitrary number of arguments is supported. Instead of a long name

one can use its standard shortcut (e.g.,

returns the title from the ID3v1 tag, or (if not there) from a cue sheet. One can use this in conditionals etc as well.

NUMBER is replaced by NUMBER-th component of the directory name (with 0 corresponding to the last component).

NUMBER is replaced by the directory name with NUMBER components stripped.

NUMBER is replaced by NUMBER-th component of the user scratch array.

: if frame FNAME does not exists, the escape is ignored; otherwise the rest of the string is reinterpreted.

are treated similarly with inverted test.

: if frame FNAME exists, the part after

is ignored; otherwise the part before

is ignored, and the rest is reinterpreted.

: if frame FNAME exists, the part after

is ignored; otherwise the part before

is ignored, and the rest is reinterpreted as if it started with

String starting with LETTER

are treated similarly to ID3v2 conditionals, but the condition is that the corresponding escape expands to non-empty string. Same applies to non-time related 2-char escapes and user variables.

Likewise for string starting with LETTER

, VALUE is interpolated, then normalized or shortened as a personal name (according to

is replaced by the result of calling the corresponding method.

is replaced by space-separated list of "long names" of ID3v2 frames (see id3v2_frame_descriptors()). (To use a different separator, put it after slash, as in

, where separator is COMMA SPACE).

is replaced by a verbose listing of frames. "simple" frames are output one-per-line (with the value surrounded by

); fields of other frames are output one-per-line. If one omits the leading

replaces the value of binary fields.

are replaced by size of ID3v2 tag in bytes, the amount of 0-padding at the end of the tag (not counting one extra 0 byte at the end of tag which may be needed for unsyncing if the last char is \xFF), and size without padding. Currently, for modified ID3v2 tag, what is returned reflect the size on disk (i.e., before modification).

if ID3v2 is present and is modified in memory; otherwise is replaced by an empty string.

, FORMAT is split on comma, and the resulting list of formats is used to convert the duration of the audio to a string using the method format_time(). (E.g.,

would print duration in (optional) hours and minutes rounded to the closest minute.)

The default for the fill character is SPACE. Fill character should preceed

if both are given. Example:

Title: %(/)-12.12t%{TIT3:; TIT3 is %\{TIT3\}}%{!TIT3:. No TIT3 is present}

Title: TITLE///////. No TIT3 is present

Fat content: %{COMM(eng,fra,fre,rus,)[FatContent]}

will print the comment field with Description

prefering the description in English to one in French, Russian, or any other language (in this order). (I do not know which one of terminology/bibliography codes for French is used, so for safety include both.)

if present, otherwise uses

but the latter may be subject to (different) normalization, and/or configuration variables).

Interpolation of ID3v2 frames uses the minimal possible non-ambiguous backslashing rules: the only backslashes needed are to protect the innermost closing delimiter (

) appearing as a literal character, or to protect backslashes immediately preceding such literal, or the closing delimiter. E.g., the pattern equal to

checks for the presence of comment with the descriptor

. Note that if you want to write this string as a Perl literal, a lot of extra backslashes may be needed (unless you use

for a file of duration 2345.62sec will result in

@results = $mp3->interpolate_with_flags($text, $flags);

Processes $text according to directives in the string $flags; $flags is split into separate flag characters; the meanings (and order of application) of flags are

i interpolate via $mp3->interpolate f interpret (the result) as filename, read from file F if file does not exist, it is not an error B read is performed in binary mode (otherwise in text mode, modified per 'decode_encoding_files' configuration variable) l split result per 'parse_split' configuration variable n as l, using the track-number-th element (1-based) in the result I interpolate (again) via $mp3->interpolate b unless present, remove leading and trailing whitespace

, may produce multiple results. May be accessed via interpolation of

Parse $string according to the regular expression $pattern with

etc. The meaning of escapes is the same as for method "interpolate" (); but (with the exception of

) they are used not for expansion, but for matching a part of $string suitable to be a value for these fields. Returns false on failure, a hash reference with parsed fields otherwise (with

Some more escapes are supported:

match substrings which are current values of artist/title/etc (

also matches leading 0s; actual file-name matches ignore the difference between

, between one and multiple consequent dots (if configuration variable

parse_filename_merge_dots

is true (default)) and are case-insensitive if configuration variable

parse_filename_ignore_case

is true (default); moreover,

will not match if the string-to-match is adjacent to a digit). Double

if you want to match to fail when the corresponding conditional

-escape would fail (a missing field, or a zero-length field for required fields).

match any string; the corresponding hash key in the result hash is what is inside braces; here

is a 4-letter word possibly followed by 2-digit number (as in names of ID3v2 tags), or what can be put in

2-digit numbers, or number1/number2 with number1,2 up to 999 are allowed for the track number (the leading 0 is stripped); 4-digit years in the range 1000..2999 are allowed for year. Alternatively, if option year_is_timestamp is TRUE (default), year may be a range of timestamps in the format understood by ID3v2 method year() (see "year" in MP3::Tag::ID3v2 ).

matches the REx in the configuration variable

matches the part of %E after the leading dot.

In list context, also returns an array reference with %{handler} groups parsed (if present). Such groups can match everything, and a successful match gives an array element with

[$method, $packages, $args, $matched]

Currently the regular expressions with capturing parens are not supported.

Returns a data structure which later can be used by parse_rex_match(). These two are equivalent:

$mp3->parse_rex($pattern, $data); $mp3->parse_rex_match($mp3->parse_rex_prepare($pattern), $data);

This call constitutes the "slow part" of the parse_rex() call; it makes sense to factor out this step if the parse_rex() with the same $pattern is called against multiple $data.

Matches $data against a data structure returned by parse_rex_prepare(). These two are equivalent:

$mp3->parse_rex($pattern, $data); $mp3->parse_rex_match($mp3->parse_rex_prepare($pattern), $data);

Parse $string according to the string $pattern with

. The meaning of escapes is the same as for "interpolate". See "parse_rex($pattern, $string)" for more details. Returns false on failure, a hash reference with parsed fields otherwise.

2-digit numbers are allowed for the track number; 4-digit years in the range 1000..2999 are allowed for year.

Returns a data structure which later can be used by parse_rex_match(). This is a counterpart of parse_rex_prepare() used with non-regular-expression patterns. These two are equivalent:

$mp3->parse($pattern, $data); $mp3->parse_rex_match($mp3->parse_prepare($pattern), $data);

This call constitutes the "slow part" of the parse() call; it makes sense to factor out this step if the parse() with the same $pattern is called against multiple $data.

filename_nodir_noextension()

abs_filename_noextension()

filename_extension_nodot()

Pm3 free download

$filename = $mp3->filename(); $abs_filename = $mp3->abs_filename(); $filename_nodir = $mp3->filename_nodir(); $abs_dirname = $mp3->dirname(); $abs_dirname = $mp3->dirname(0); $abs_parentdir = $mp3->dirname(1); $last_dir_component = $mp3->dir_component(0);

Return the name of the audio file: either as given to the new() method, or absolute, or directory-less, or originally given without extension, or directory-less without extension, or absolute without extension, or the directory part of the fullname only, or filename extension (with dot included, or not).

The extension is calculated using the config() value

The dirname() method takes an optional argument: the number of directory components to strip; the

method returns one component of the directory (to get the last use 0 as $level; this is the default if no $level is specified).

The configuration option

decode_encoding_filename

can be used to specify the encoding of the filename; all these functions would use filename decoded from this encoding.

These methods return the information about the contents of the MP3 file. If this information is not cached in ID3v2 tags (not implemented yet), using these methods requires that the module MP3::Info is installed. Since these calls are redirectoed to the module MP3::Info, the returned info is subject to the same restrictions as the method get_mp3info() of this module; in particular, the information about the frame number and frame length is only approximate.

vbr_scale() is from the VBR header; total_secs() is not necessarily an integer, but total_secs_int() and total_secs_trunc() are (first is rounded, second truncated); time_mm_ss() has format

flavors return the value as a string Yes or No; mpeg_layer_roman() returns the value as a roman numeral; channel_mode() takes values in

$output = $mp3->format_time(67456.123, @format);

formats time according to @format, which should be a list of format descriptors. Each format descriptor is either a simple letter, or a string in braces appropriate to be put after

in an interpolated string. A format descriptor can be followed by a literal string to be put as a suffix, and can be preceded by a question mark, which says that this part of format should be printed only if needed.

Leftover minutes, seconds are formated 0-padded to width 2 if they are preceded by more coarse units. Similarly, leftover milliseconds are printed with leading dot, and 0-padded to width 3.

Both will print hours, minutes, and milliseconds only if needed. The second one will use 3 digit-format after a point, the first one will not print the trailing 0s of milliseconds. The first one uses

as separator of hours and minutes, the second one will use

Optionally, the first element of the array may be of the form

. In this case, duration is rounded to closest hours, min or second before processing. (E.g., 1.7sec would print as

s above, but would print as

checks permission to write per the configuration variable

as can_write(), but die()s on non-writable files with meaningful error message ($mess is prepended to the message).

die() with the same message as can_write_or_die().

Checks that extension is (case-insensitively) in the list given by configuration variable

$mp3 = MP3::Tag->new($filename); $mp3->update_tags(); # Fetches the info, and updates tags $mp3->update_tags({}); # Updates tags if needed/changed $mp3->update_tags({title => 'This is not a song'}); # Updates tags

This method updates ID3v1 and ID3v2 tags (the latter only if in-memory copy contains any data, or $data does not fit ID3v1 restrictions, or $force2 argument is given) with the the information about title, artist, album, year, comment, track, genre from the hash reference $data. The format of $data is the same as one returned from autoinfo() (with or without the optional argument 'from'). The fields which are marked as coming from ID3v1 or ID3v2 tags are not updated when written to the same tag.

If $data is not defined or missing,

is called to obtain the data. Returns the object reference itself to simplify chaining of method calls.

This is probably the simplest way to set data in the tags: populate $data and call this method - no further tinkering with subtags is needed.

$mp3->extension_is(@EXT_LIST)

returns TRUE if the extension of the filename coincides (case-insensitive) with one of the elements of the list.

Reads configuration information from the specified file (defaults to the value of configuration variable

-substituted). Empty lines and lines starting with

are ignored. The remaining lines should have format

; leading and trailing whitespace is stripped; there may be several lines with the same

; this sets list-valued variables.

Some defaults for the operation of this module (and/or scripts distributed with this module) are set from environment. Assumed encodings (0 or encoding name): for read access:

MP3TAG_DECODE_V1_DEFAULT MP3TAG_DECODE_V2_DEFAULT MP3TAG_DECODE_FILENAME_DEFAULT MP3TAG_DECODE_FILES_DEFAULT MP3TAG_DECODE_INF_DEFAULT MP3TAG_DECODE_CDDB_FILE_DEFAULT MP3TAG_DECODE_CUE_DEFAULT

MP3TAG_ENCODE_V1_DEFAULT MP3TAG_ENCODE_FILES_DEFAULT

(if not set, default to corresponding

MP3TAG_DECODE_DEFAULT MP3TAG_ENCODE_DEFAULT

(if the second one is not set, the value of the first one is used). Value 0 for more specific variable will cancel the effect of the less specific variables.

These variables set default configuration settings for

; the values are read during the load time of the module. After load, one can use config()/get_config() methods to change/access these settings. See

in documentation of config method. (Note that

variant govern file read/written in non-binary mode by "ParseData" in MP3 module, as well as reading of control files of some scripts using this module, such as typeset_audio_dir.)

Assume that locally present CDDB files and .inf files are in encoding

(this is not supported by "standard", but since the standard supports only a handful of languages, this is widely used anyway), and that one wants

fields to be in the same encoding, but

have an honest (Unicode, if needed) encoding. Then set

MP3TAG_DECODE_INF_DEFAULT=cp1251 MP3TAG_DECODE_CDDB_FILE_DEFAULT=cp1251 MP3TAG_DECODE_V1_DEFAULT=cp1251

MP3TAG_DECODE_V1_DEFAULT

MP3TAG_ENCODE_V1_DEFAULT

, you will get the desired effect both for read and write of MP3 tags.

Additionally, the following (unsupported) variables are currently recognized by ID3v2 code:

MP3TAG_DECODE_UNICODE MP3TAG_DECODE_UTF8

MP3TAG_DECODE_UNICODE (default 1) enables decoding; the target of decoding is determined by MP3TAG_DECODE_UTF8: if 0, decoded values are byte-encoded UTF-8 (every Perl character contains a byte of UTF-8 encoded string); otherwise (default) it is a native Perl Unicode string.

is true, local customization files are not loaded.

Many aspects of operation of this module are subject to certain subtle choices. A lot of effort went into making these choices customizable, by setting global or per-object configuration variables.

A certain degree of customization of global configuration variables is available via the environment variables. Moreover, at startup the local customization file ~/.mp3tagprc is read, and defaults are set accordingly.

In addition, to make customization as flexible as possible, ALL aspects of operation of

are subject to local override. Three customization modules

MP3::Tag::User MP3::Tag::Site MP3::Tag::Vendor

are attempted to be loaded if present. Only the first module (of those present) is loaded directly; if sequential load is desirable, the first thing a customization module should do is to call

The customization modules have an opportunity to change global configuration variables on load. To allow more flexibility, they may override any method defined in

; as usual, the overriden method may be called using

E.g., it is recommended to make a local customization file with

eval 'require Normalize::Text::Music_Fields'; for my $elt ( qw( title track artist album comment year genre title_track artist_collection person ) ) { no strict 'refs'; MP3::Tag->config("translate_$elt", \&{"Normalize::Text::Music_Fields::normalize_$elt"}) if defined &{"Normalize::Text::Music_Fields::normalize_$elt"}; } MP3::Tag->config("short_person", \&Normalize::Text::Music_Fields::short_person) if defined &Normalize::Text::Music_Fields::short_person;

and install the (supplied, in the examples/modules) module Normalize::Text::Music_Fields which enables normalization of person names (to a long or a short form), and of music piece names to canonical forms.

To simplify debugging of local customization, it may be switched off completely by setting MP3TAG_SKIP_LOCAL to TRUE (in environment).

into ~/.mp3tagprc will produce broken ID3v2 tags (but those required by ITunes).

Some example scripts come with this module (either installed, or in directory examples in the distribution); they either use this module, or provide data understood by this module:

perform command line manipulation of audio tags (and more!);

rename audio files according to associated tags (and more!);

write LaTeX files suitable for CD covers and normal-size sheet descriptions of hierarchy of audio files;

Calculate total duration of audio files;

remove WAV headers from MP3 files in WAV containers.

converts a CD's "full TOC" to a "fake" CDDB file (header only). Create this file with something like

readcd -fulltoc dev=0,1,0 -f=audio_cd >& nul

fulltoc_2fake_cddb < | cddb2cddb > cddb.out

tries to convert a directory of MP3 files to a "fake" CDDB file (header only); assumes that files are a rip from a CD, and that alphabetical sort gives the track order (works only heuristically, since quantization of duration of MP3 files and of CD tracks is so different).

dir_mp3_2fake_cddb | cddb2cddb > cddb.out

tries to convert a directory of .inf files to a "fake" CDDB file (header only). (Still heuristic, since it can't guess the length of the leader.)

inf_2fake_cddb | cddb2cddb > cddb.out

Reads a (header of) CDDB file from STDIN, outputs (on STDOUT) the current version of the database record. Can be used to update a file, and/or to convert a fake CDDB file to a real one.

(Last four do not use these modules!)

# Convert from one (non-standard-conforming!) encoding to another perl -MMP3::Tag -MEncode -wle ' my @fields = qw(artist album title comment); for my $f (@ARGV) { print $f; my $t = MP3::Tag->new($f) or die; $t->update_tags( { map { $_ => encode "cp1251", decode "koi8-r", $t->$_() }, @fields } ); }' list_of_audio_files

The largest problem with ID3 format is that the first versions of these format were absolutely broken (underspecified). It looks like the newer versions of this format resolved most of these problems; however, in reality they did not (due to unspecified backward compatibility, and grandfathering considerations).

What are the problems with

? First, one of the fields was

, which does not make any sense. In particular, different people/publishers would put there performer(s), composer, author of text/lyrics, or a combination of these. The second problem is that the only allowed encoding was

; since most of languages of the world can't be expressed in this encoding, this restriction was completely ignored, thus the encoding is essentially "unknown".

allow specification of encodings; however, since there is no way to specify that the encoding is "unknown", when a tag is automatically upgraded from

, it is most probably assumed to be in the "standard"

encoding. Thus impossibility to distinguish "unknown, assumed

, essentially, makes any encoding specified in the tag "unknown" (or, at least, "untrusted"). (Since the upgrade [or a chain of upgrades] from the

tag can result in any encoding of the "supposedly

" tag, one cannot trust the content of

tag even if it stored as Unicode strings.)

This is why this module provides what some may consider only lukewarm support for encoding field in ID3v2 tags: if done fully automatic, it can allow instant propagation of wrong information; and this propagation is in a form which is quite hard to undo (but still possible to do with suitable settings to this module; see "Examples on dealing with broken encodings" in mp3info2 ).

Likewise, the same happens with the

. Since there is no way to specify just "artist, type unknown" in

tag is automatically upgraded to

, the content would most probably be put in the "main performer",

, tag. As a result, the content of

tag is also "untrusted" - it may contain, e.g., the composer.

In my opinion, a different field should be used for "known to be principal performer"; for example, the method performer() (and the script mp3info2 shipped with this module) uses

For example, interpolate

if present, if not, it will use the frame

(the first example), or will try to get artist by other means (including

frame) (the second example).

There are many files with special meaning to this module and its dependent modules.

Files with extension .inf and the same basename as the audio file are read by module

, and the extracted data is merged into the information flow according to configuration variable

It is assumed that these files are compatible in format to the files written by the program cdda2wav.

in the same directory as the audio file are read by module

, and the extracted data is merged into the information flow according to configuration variable

(In fact, the list may be customized by configuration variable

in the same directory as the audio file may be read by the method id3v2_frames_autofill() (should be called explicitly) to fill the

frame. Depends on contents of configuration variable

By default, this file is read on startup (may be customized by overriding the method parse_cfg()). By default, the name of the file is in the configuration variable

Copyright (c) 2000-2016 Thomas Geffert, Ilya Zakharevich. All rights reserved.

This program is free software; you can redistribute it and/or modify it under the terms of the Artistic License, distributed with Perl.

To install MP3::Tag, simply copy and paste either of the commands in to your terminal

perl -MCPAN -e shell install MP3::Tag

mp3-free-downloads.com

Posted by at 12:00AM

Tags: program download music, mp3 music download online, free mp3 music search & download, www mp3 song, free mp3 downloder, mp3 converter free download, online mp3 converter, all mp3 free download, pm3 free download, myfreemp3

Overall rating page: 3.74/5 left 27360 people.

Comments

There are no comments for this post "MP3::Tag - Module for reading tags of MP3 audio files -". Be the first to comment...

Add Comment